[vc_row][vc_column][vc_column_text]Skirting boards are an important part of the home, but they’re also something you don’t really pay much attention to. If you’re planning on installing some new skirting boards into your home, then you want to make sure you have the right materials, like MDF skirting boards and other tools that will help provide you with the most professional finish. It’s a DIY job that’s relatively straight-forward to achieve, and hopefully, this guide will provide you with all the relevant information you need on how to install skirting boards.
Before you start the process of fitting skirting boards, you’ll want to check you have everything you need in order to get the job done yourself. A pencil will be useful for making relevant markings on your boards, and a tape measurer is good when it comes to sizing up the boards against your wall. In terms of cutting equipment, a mitre saw and coping saw are both going to help you successfully chop the boards without causing any damage to the materials itself. Obviously, you want the skirting boards that you’ve picked, whether it’s MDF or some other material, and instant grab adhesive to fix the skirting board to the wall.
If you want to screw the boards to the wall, then most households will likely have a drill, nails, and screws. A hammer can be beneficial for making sure the skirting boards are sitting right up against the wall. Wood filler and decorator’s chalk are good for filling in any small gaps.
How to fit new skirting boards – Housing industry (residential)
Step 1 – You’ll first want to measure the area where the skirting board is going to be fitted in order to fit and cut the relevant boards up properly. You might want to add around 20-25% extra onto the measurements in order to make room for any initial cuts where you might have gone in too far.
Step 2 – Decide on which side of the skirting board is facing outwards. Some will have a different appearance on each side, so you want to make sure which side you prefer. Mark these up with your pencil so that you know when it comes to attaching it to the wall.
Step 3 – It’s now time to measure up, cut, and then fit any of the skirting boards that are going around a square edge. Internal corners will need you to cut a 45-degree angle with your mitre saw, and then you’ll use your coping saw to cut away anything extra that you don’t need. If you’re a bit unsure of how easily you’ll be able to cut it, practice on some spare bits of board beforehand. With your external corners, again, you’ll need to mitre them at a 45-degree angle. This will then be repeated but on the opposite side for the other corner of the board.
Step 4 – Attach your boards using some instant grab adhesive. If you want to fix it to the wall with screws, then you can do this for either plasterboard or solid walls. Wood filler can help cover up the nail heads with gaps filled in using the decorator’s chaulk.
It might take a little trial and error, but some new skirting boards in your home can certainly transform the room in a subtle way. If you’re wondering how to fit skirting boards, then make sure you use the tips above to provide a professional finish.
The Final Fit
Thanks to over one-hundred years of combine experience, we are able manufacture and produce a wide range of high quality, cost-effective MDF skirting boards. If your interested in our MDF skirting boards or would like to find out more, feel free to get in touch today on 0333 366 0249 or send us an email on firstname.lastname@example.org. We look forward to hearing from you.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][woodmart_products layout=”carousel” spacing=”10″ speed=”1000″ element_title=”Check Out Our Range” taxonomies=”133, 131, 115″ slides_per_view=”4″ autoplay=”yes” hide_pagination_control=”yes” hide_prev_next_buttons=”yes” center_mode=”no” wrap=”yes” sale_countdown=”0″ stock_progress_bar=”0″ highlighted_products=”0″ products_bordered_grid=”0″ lazy_loading=”no” scroll_carousel_init=”no”][/vc_column][/vc_row]